+
  • 切割机c(1).jpg

SPC crusher machine


Hangzhou Fuyang Dongshan Plastic Machinery Co., Ltd. specialized in manufacturing EPS, EPP foam plastics machine for nearly 20 years with integrating independent R&D, manufacture, sales and service.

Category:Product Categories

Products Detail

Auto digital single/double door vertical block molding machine

Control System

PLC and human-touch Control, automatic operation, convenient maintenance.
Automatic feeding system

Structure Design 

The unique double-door vertical structure has a small footprint and higher plant utilization.
Vertical block machine structure can effectively reduce the moisture content of the finished product.
The machine is welded by high-strength square tubes and steel plates with good strength.
All templates are heat treated to remove stress and prevent deformation.
After heat treatment, all templates are sandblasted and derusted, and sprayed with antirust primer and topcoat, which greatly improves the corrosion resistance and extends the service life 

Processes

The automatic weighing roll-out device can be well connected with the drying tunnel of the drying room, which can realize automatic production and reduce labor costs.
The foam pressure gauge is used for more precise pressure control and better product stability.
Automatic pneumatic feeding and vacuum assistant feeding devices are used for feeding material to mould cavity. 
Advanced EPS penetration heating and orderly molding process for strong thermal penetration ability and good adhesion.

Production Efficiency 

Fast feeding and cooling speed, low cost.
Short production cycle and high output. Every board only takes 4-8min.
Products with good bonding ability and stable size.
Energy saving.

Technical Data

        Item

Unit

SPB2000LZ

SPB3000LZ

SPB4000LZ


Mould Cavity Size

mm

2040×1240×1030

3060×1240×1030

4080×1240×1030

×2

×2

×2

Block Size
(12g/L)

mm

2000×1200×1000

3000×1200×1000

4000×1200×1000

×2

×2

×2


Steam

Inlet

Inch

4"(DN100)

5"(DN125)

6"(DN150)

Consumption

Kg/Cycle

70~100

100~130

130~160

Pressure

MPa

0.75~0.85

0.75~0.85

0.75~0.85


Compressed Air

Inlet

Inch

3"(DN80)

3"(DN80)

4"(DN100)

Consumption

M³/Cycle

1.5~2.5

2~3

2.5~3.5

Pressure

MPa

0.6

0.6

0.6

Vacuum

Inlet

Inch

2"(DN50)

2.5"(DN65)

3"(DN80)


Cooling Water

Consumption

Kg/Cycle

0.6~0.8

0.8~1.0

1.0~1.2

Pressure

MPa

0.4~0.6

0.4~0.6

0.4~0.6


Drainage


 Drain Outlet

Inch

5"(DN125)

6"(DN150)

8"(DN200)


Air Outlet

Inch

6"(DN150)

8"(DN200)

8"(DN200)


Vacuum drain Outlet

Inch

4"(DN100)

5"(DN125)

5"(DN125)

Produce time / Cycle(12g/L)

min/Cycle

6

7

8

Connected Load/Power

Kw

13/28

16.5/28.5

16.5/28.5

Overall Dimension(L*W*H)

mm

6700×4600×4100

6700×4600×5100

6700×4600×6100

Weight

Kg

12200

14800

17200

Related Products
Messages