NEWS

Hangzhou Fuyang Dongshan Plastic Machinery Co., Ltd.


15

2022

-

06

What are the rules for using the board machine?

Author:


The model of the plate machine is cp-130. The capacity of this machine to handle EPS is 13.6~18.4kg/h, and the density of the final product will increase by 40 times. The latest compaction density control can even reach 320.5kg/m3. The block machine is mainly used for pressing PU materials. The difference between the hot-pressing briquetting machine and the cold-pressing briquetting machine is that a heater is added to the pressing section of the cold-pressing briquetting machine, so that the material passing through the heating section is heated. It is extruded from the discharge port in a semi-molten state. Heger exhibited this type of briquetting machine at the K exhibition in Germany in 2007. This type of briquetting machine has high extrusion density, and the unit output can reach more than 500KG per cubic meter. , Hot-melt briquetting machine, similar to the extrusion machine, after the material is completely melted, it is pushed out from the discharge port.

Human-machine dialogue, foam plastic machinery has a variety of heating, cooling, filling, product release and other processes to adapt to different EPS products, using hot-dip galvanizing machine, strengthen anti-corrosion, greatly improve the service life of the machine, consumers in When choosing to buy a cutting machine, be sure to look at the service life of the product, in addition to professional manufacturers can do a good job of service.

     The disadvantage of this model is that it is the same as the hot pressing type, which requires adding one or more heating modules. The hydraulic pushing type adopts a screwless design, uses hydraulic pressure to do work, and exerts sufficient pressure on objects in a certain space. To densify the object, so as to achieve the purpose of the location. This kind of machine is much more complicated than the previous models, but the pressing effect is the best. The maximum output can reach more than 700KG per cubic meter. This compactor is mainly used for It is used for compacting product scraps for large EPS molding machines, as well as briquetting machines with other structures. The above models are the most used and the most common.

related news